Version 4 RMR Slide for Glock 17 Gen3 – RMR / DPP Cut

SLIDES BUILT TO OUTRUN STOCK. THIS ONE – VERSION 4 – RMR / DPP CUT – G17 GEN3.

Your G17 Gen3 was built to run. Stock Glock slides are generic – thoughtfully designed to be plain, no cut, no grip. This is not that. Version 4 RMR Slide for Glock 17 Gen3 – RMR / DPP Cut is a performance upgrade for people who care about optic control, grip under pressure, and not running stock slab.

Short. Confident. Active. Mission ready. Zero compromise. This is the glock 17 gen3 rmr slide version 4 that cuts ready when pace picks up.

BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM. V4 TEXTURE THAT LASTS.

Version 4 design – honeycomb serrations – V4 signature – aggressive grip texture – front + rear – honeycomb pattern – hexagonal – traction when hands wet, sweaty, gloved – billet 17-4 stainless steel – CNC machined – black nitride – corrosion resistant – milled for Trijicon RMR & Leupold DeltaPoint Pro – RMR cut – DPP cut – dual optic pattern – direct mount – no plate needed for RMR – plate optional for DPP – suppressor height sights ready – cover plate included – screws included.

Billet steel – 17-4 stainless – heat treated – black nitride – matte black – V4 – Version 4 – honeycomb – G17 Gen3 compatible – fits Glock 17 Gen3 – G17 Gen3 frame – 9mm – Gen3 only – not Gen4 / Gen5 – RMR footprint – Trijicon RMR, SRO, Holosun 407C/507C/508T – DPP footprint – Leupold DeltaPoint Pro – direct fit. Stock G17 Gen3 slides plain, no optic cut, fail when optic matters. This one stays locked and keeps its V4.

POSITIVE GRIP. OPTIC READY. V4 THAT HOLDS.

Mount. Zero. This glock 17 gen3 rmr slide version 4 means positive grip – V4 honeycomb serrations grab – front serrations – enhanced – rear serrations – honeycomb + angled – positive manipulation – press check – rack – optic ready – RMR cut – milled – Trijicon RMR footprint – Leupold DPP – DPP cut – co-witness with suppressor sights – optic sits low – maintains zero.

Assisted optic starts with RMR cut – slide milled – optic seats – screws torque – cover plate – removable – when optic not used – plate protects cut – V4 texture maintains grip under high round counts. Slight swagger toward stock – stock G17 Gen3 slides are plain, no cut, no grip, fail when pace picks up. This one stays locked and keeps its V4.

DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.

Drop-in fit – no fitting required for Glock 17 Gen3. This glock 17 gen3 rmr slide version 4 works with factory Glock 17 Gen3 frame – G17 Gen3 – 9mm – fits Gen3 lower – includes slide + RMR cover plate + screws – no barrel – no recoil assembly – no internals – stripped – ready for builder – install with Glock armorer tool.

Built for Glock 17 Gen3 platforms that see real use. Competition, duty, carry, range – optic ready.

CONTROL UNDER PRESSURE. NO COMPROMISES.

Runs hard – you need slide that doesn’t slip and optic cut that holds zero. Version 4 – honeycomb – RMR / DPP Cut – G17 Gen3 – optic ready. Competition, duty, carry, range ready. No stock slop.

SPECS – FACTUAL AND PRECISE.

Model: Version 4 RMR Slide for Glock 17 Gen3 – RMR / DPP Cut – V4 – G17 Gen3 – Milled For Trijicon RMR & Leupold Deltapoint Pro
Color: Black Nitride – Matte Black – 17-4 Stainless Steel – Billet – V4 Honeycomb Texture – Black – Hardened
Compatibility: Glock 17 Gen3 – G17 Gen3 Only – Not Gen4 / Gen5 – 9mm – RMR Cut – DPP Cut – Trijicon RMR / SRO / Holosun 407C/507C/508T / Leupold DPP – Cover Plate Included
Mounting: Drop-In – Stripped Slide – Includes Cover Plate + Screws – No Barrel / RSA / Internals – Ready to Build – G17 Gen3
Interface: Slide – V4 Slide – glock 17 gen3 rmr slide version 4 – Honeycomb Serrations – RMR / DPP Milled – Optic Ready – Enhanced Grip
Weight: 11.2 oz – Steel – 17-4 Stainless – Billet – Spec – Competition Ready – V4 RMR Slide

Free shipping over $150. Packed right, shipped fast. Add optic dominance to your Version 4 RMR Slide for Glock 17 Gen3 – RMR / DPP Cut.