Pmag Limiter 223 Rem/5.56 Nato -10 Rounds Gen3 Polymer Black

MAGS BUILT TO OUTRUN STOCK.

Stock 30-rounders get you flagged in ban states, hunting regs, and range rules. The solution isn’t buying weak 10-round mags – it’s limiting what you already trust. PMAG Limiter 223 Rem/5.56 NATO – 10 Rounds Gen3 Polymer Black – built to convert your Gen M3 PMAG 30 to a 10-round compliant mag. MAG286-BLK insert replaces the follower leg to physically block at 10. Not a pin, not a rivet – a factory-engineered limiter that keeps your PMAG reliable. Engineered for PMAG Gen M3 30 Round – AR15/M4 – MAG557. 10 rounds – where law demands, performance remains.

POSITIVE FEEDING. FASTER FOLLOW-UPS.

Limiting a mag incorrectly causes tilt, drag, and failures. This doesn’t. Gen3 polymer limiter maintains constant-curve internal geometry. Works with standard Magpul anti-tilt follower and long-life stainless steel spring – constant force from round 1 to 10. No nosedive, no bolt override, no double-feed. Same positive feeding you expect from PMAG, now hunting and ban-state legal. Keeps a 30-round external body for better handling, grip, and prone stability – unlike tiny 10-rounders that disappear in the magwell. Every malfunction you don’t clear is time saved. Victory is still earned, even at 10 rounds.

BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.

Impact-resistant Gen3 polymer – same formula as PMAG Gen M3 body. Black – molded color, not painted. Won’t chip, won’t crack under recoil or drops. Simple 2-piece design – limiter body + locking plate. Installs in under 60 seconds – remove floorplate, remove spring, replace follower insert with limiter, reassemble. No tools, no epoxy, no permanent mod. Reversible – pull it out, go back to 30 where legal. Meets ATF compliance – permanent limiting method accepted for hunting and capacity-restricted states – CA, NY, CT, CO, MA, NJ. Resists crushing, swelling, and chemical exposure. Sealed design keeps sand and carbon out. Rated for .223 Rem and 5.56x45mm NATO. Every unit is factory spec. Arrives ready to install.

CONTROL UNDER PRESSURE. NO COMPROMISES.

10 rounds doesn’t mean 10% performance. Keeps full-size 30-round PMAG grip for faster reloads under stress. Aggressive texture, ribbed floorplate – you still control the mag. Compliant for deer hunting in states that require a 10-round limit. Legal for range days in restricted states. Low-profile black – blends with rifle, doesn’t glare. Competition and patrol ready when rules say 10. Large-frame control starts in the mag, even limited. Keeps AR flat and stable. All factory safeties retained.

DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.

Fits PMAG Gen M3 30 Round AR15/M4 only – MAG557-BLK, MCT, etc. Will NOT fit PMAG Gen M2, D-60 Drum, 20-round PMAGs, or USGI mags. Mil-spec magwell compatible. Seats positively on open or closed bolt. No filing, no Dremel, no gunsmith. Just install and send. 10-round capacity – meets hunting regs in most states and ban-state laws. ATF-compliant limiting – counts as a 10-round mag.

THE LINEUP – PICK YOUR PLATFORM.

Flex3MR – Positive reset driven by bolt carrier.
E-CT1 3.5lb Flat – Clean break, flat-face dominance.
PMAG D-50 GL9 – 50 rounds. One mag. Complete dominance.
Gen M3 PMAG 300BLK 20Rds – 20 rounds optimized.
PMAG Limiter 10 Rounds – Stay compliant, run Gen M3.
Gen M3 PMAG LR/SR .308 20 Rds – Full power dominance.
Subgun Magazine Pull – Fix your SMG mags.

SPECS – FACTUAL AND PRECISE.

Model: PMAG Limiter 223 Rem/5.56 NATO -10 Rounds Gen3 Polymer Black – MAG286-BLK
Capacity: Limits 30rd PMAG Gen M3 to 10 Rounds – Compliant
Compatibility: PMAG Gen M3 30 Round AR15/M4 – MAG557 – Only – 223/5.56
Material: Impact-Resistant Gen3 Polymer – Black
Function: Internal capacity limiter – Reversible – No permanent modification

Free shipping over $150. Packed right, shipped fast. Stay 10-round compliant.