Handguard for AR-15 Mid Length Black Polymer

HANDGUARDS BUILT TO OUTRUN STOCK.

Factory mid-length handguards melt, rattle, and burn your hand. Two-piece clamshell that shifts under recoil and traps heat. Handguard for AR-15 Mid Length Black Polymer – built to fix mid-length furniture. Mid-length – fits standard mid gas system – 9 inch – fits AR-15 with front sight base or low-profile gas block and delta ring + handguard cap. Black – molded polymer, not painted. M-LOK compatible – direct mount – slots at 3, 6, 9 o’clock. Reinforced internal heat shields – keeps hand cool after mag dumps. Built to outrun stock.

POSITIVE GRIP. FASTER TRANSITIONS.

Stock handguards are slick when wet and fat in hand. This isn’t. Slim profile – improved ergonomics – better C-clamp grip, better barricade control. Aggressive texturing – front and rear – grips glove or bare hand. M-LOK slots – 7 slots per side + bottom – mount vertical grip, light mount, hand stop, bipod. Flat bottom – stable on bag or barricade. Extended front lip – protects hand from hot front sight base. No flex under sling tension. Every transition you don’t fight is time saved. Victory is still earned, mid-length gives you more real estate.

BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.

Impact-resistant reinforced polymer – same formula as rifle stocks – lighter than aluminum quad rail. Black – UV stabilized – won’t fade in sun, won’t chip when dropped. Internal aluminum heat shields – dual layer – deflects barrel heat – keeps polymer cool for 300-round strings. Resists solvents, oils, deet. Drop-in install – no tools beyond delta ring tool – pull delta ring, pop out old, snap in new. No handguard cap modification. No free-float barrel nut – keeps Mil-spec reliability. Cold proof to -40F, heat proof to 180F. Will not loosen under full-auto. Every unit factory spec. Arrives ready to install.

CONTROL UNDER PRESSURE. NO COMPROMISES.

Mid-length ARs run cooler – you need a guard that keeps it that way. M-LOK slots – keep weight low – mount only what you need. Black – low-vis, no glare, matches black lower, stock, grip. Lightweight – 9.2 oz with shields – vs 14+ oz aluminum quad. Keeps front end light – faster swing, less fatigue – extra length vs carbine for better control. Sling mount – front integral sling swivel provision + M-LOK QD socket mount compatible. No sharp edges – snag-free. Competition, patrol, and field ready. All factory safeties retained. No modification to gas system.

DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.

Fits AR-15 Mid-Length – 9 inch – with mid gas system, front sight base or low-pro gas block, round handguard cap, and Mil-spec delta ring – standard on S&W, Ruger, PSA, Aero, Del-Ton. Will NOT fit carbine-length, rifle-length, or piston guns without adapter. Will NOT fit free-float uppers. Mounts in 60 seconds – pull delta ring back, insert halves, release. Positive lock – won’t walk off under recoil. Works with M-LOK accessories – MVG, AFG, light mounts, bipod mounts. Will not interfere with bayonet lug on most models.

SPECS – FACTUAL AND PRECISE.

Model: Handguard for AR-15 Mid Length Black Polymer – Mid M-LOK Polymer
Color: Black – Molded Reinforced Polymer – Internal Aluminum Heat Shields
Compatibility: AR-15 Mid Gas – 9 inch – Delta Ring + Front Handguard Cap – Front Sight Base or Low-Pro Gas Block
Mounting: Drop-In – Replaces Standard M4 Two-Piece Mid Handguards – No Gunsmith
Slots: M-LOK – 7 Slots Per Side – Bottom – Direct Attach – Compatible with All M-LOK Accessories
Length: Mid-Length – 9 inch – Weight: 9.2 oz – Black

Free shipping over $150. Packed right, shipped fast. Upgrade your mid-length in black.