Handguard for AR-15 Carbine Length Black

HANDGUARDS BUILT TO OUTRUN STOCK.

Factory M4 handguards melt, rattle, and burn your hand. Two-piece clamshell that shifts under recoil and traps heat. Handguard for AR-15 Carbine Length Black – built to fix carbine furniture. Carbine-length – fits standard carbine gas system – 7 inch – fits AR-15 with front sight base or low-profile gas block and delta ring + handguard cap. Black – molded polymer, not painted. M-LOK compatible – direct mount – slots at 3, 6, 9 o’clock. Reinforced internal heat shields – keep the hand cool after mag dumps. Built to outrun stock.

POSITIVE GRIP. FASTER TRANSITIONS.

Stock handguards are slick when wet and fat in hand. This isn’t. Slim profile – improved ergonomics – better C-clamp grip, better barricade control. Aggressive texturing – front and rear – grips glove or bare hand. M-LOK slots – 7 slots per side + bottom – mount vertical grip, light mount, hand stop, bipod. Flat bottom – stable on bag or barricade. Extended front lip – protects hand from hot front sight base. No flex under sling tension. Every transition you don’t fight is time saved. Victory is still earned, even in black.

BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.

Impact-resistant reinforced polymer – same formula as rifle stocks – lighter than aluminum quad rail. Black – UV-stabilized – won’t fade in sun, won’t chip when dropped. Internal aluminum heat shields – dual layer – deflect barrel heat – keeps polymer cool for 300-round strings. Resists solvents, oils, DEET. Drop-in install – no tools beyond delta ring tool – pull delta ring, pop out old, snap in new. No handguard cap modification. No free-float barrel nut – keeps Mil-spec reliability. Cold-proof to -40F, heat-proof to 180F. Will not loosen under full-auto. Every unit is factory spec. Arrives ready to install.

CONTROL UNDER PRESSURE. NO COMPROMISES.

Carbine ARs run hot – you need a guard that doesn’t. M-LOK slots – keep weight low – mount only what you need. Black – low-vis, no glare, matches black lower, stock, grip. Lightweight – 8.2 oz with shields – vs 12+ oz aluminum quad. Keeps front end light – faster swing, less fatigue. Sling mount – front integral sling swivel provision + M-LOK QD socket mount compatible. No sharp edges – snag-free. Competition, patrol, and field ready. All factory safeties retained. No modification to gas system.

DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.

Fits AR-15 Carbine-Length – 7 inch – with carbine gas system, front sight base or low-pro gas block, round handguard cap, and Mil-spec delta ring – standard on Colt, S&W, Ruger, PSA, Aero. Will NOT fit mid-length, rifle-length, or piston guns without adapter. Will NOT fit free-float uppers. Mounts in 60 seconds – pull delta ring back, insert halves, release. Positive lock – won’t walk off under recoil. Works with M-LOK accessories – MVG, AFG, light mounts, bipod mounts. Will not interfere with bayonet lug on most models.

SPECS – FACTUAL AND PRECISE.

Model: Handguard for AR-15 Carbine Length Black – Carbine M-LOK Polymer
Color: Black – Molded Reinforced Polymer – Internal Aluminum Heat Shields
Compatibility: AR-15 Carbine Gas – 7 inch – Delta Ring + Front Handguard Cap – Front Sight Base or Low-Pro Gas Block
Mounting: Drop-In – Replaces Standard M4 Two-Piece Handguards – No Gunsmithing
Slots: M-LOK – 7 Slots Per Side – Bottom – Direct Attach – Compatible with All M-LOK Accessories
Length: Carbine – 7 inches – Weight: 8.2 oz – Black

Free shipping over $150. Packed right, shipped fast. Upgrade your carbine in black.