Free U.S. Shipping on Orders Over $150
$ 174.48
Lock Trigger. Hold Strong – Red Forward. Flat Faced Forward Set Trigger Kit for M&P M2.0 – Red – Polymer – built to outrun stock trigger. Drop-in – no gunsmith – flat face – polymer body – forward set – competition ready – solid polymer trigger with center pivot safety – maintains factory safety values. Reduces trigger travel – reduces reset – lighter pull – crisper break – tighter groups. Type: forward set sear & trigger kit – flat faced polymer – fits M&P M2.0 – polymer frame – 9mm / .40 / .45 ACP / 10mm – red. Reinforced – keeps locked after rapid fire. Built to outrun stock. Drop it in. Run it hard.
In stock – ready to ship
In stock – ready to ship
TRIGGERS BUILT TO OUTRUN STOCK.
Factory M2.0 triggers are hinged, gritty, and compromise control. Spongy take-up that stacks and limits accuracy. Flat Faced Forward Set Trigger Kit for M&P M2.0 – Red – Polymer – built to fix M2.0 pistol. Type: forward set sear & trigger kit – flat faced polymer trigger – fits M2.0 – polymer frame – 9mm / .40 S&W / .45 ACP / 10mm – drop-in – no fitting – budget friendly competition grade. Finish: Red – polymer – solid body trigger – steel forward set sear actuator – heat treated. Flat face – forward set geometry – center mounted pivoting safety – maintains factory safety values – ready for carry or comp. Reinforced – keeps locked after mag dumps. Built to outrun stock. Color: red polymer – matches custom builds.
POSITIVE GRIP. FASTER TRANSITIONS.
Stock triggers are curved, hinged, and slip under stress. This isn’t. Flat faced profile – aggressive flat face – improved ergonomics – better finger placement – consistent pull – no burn on rapid fire. Forward set design – reduces overall trigger travel – reduces over-travel – shorter reset – faster follow-up shots, less fatigue. Solid polymer trigger – steel sear – reduced pull weight – approximately 1lb reduction vs factory – prevents wear under sweat and solvents. Every transition you don’t fight is time saved. Victory is still earned, stays locked in red forward.
BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.
Solid body polymer trigger + forward set sear actuator – direct replacement – tighter than factory – plus forward set sear – maintains factory safety values. Hard finish – Red polymer – won’t fade, won’t chip – polymer body – lighter than aluminum – harder than factory. Direct drop-in – no gunsmith – no fixtures – field strip M2.0, remove factory trigger and sear, drop in flat faced kit – 30 seconds – easily installed. No modification to fire control – no fitting – keeps reliability. Cold proof to -40F, heat proof to 600F. Will not walk off under 1000 round day or competition use. Length: factory forward set – M2.0 Gen polymer frame only – fits all M2.0 polymer – 9mm / .40 / .45 / 10mm – not Shield – not 1.0 – not Metal Frame. Every unit factory spec. Arrives ready to install.
CONTROL UNDER PRESSURE. NO COMPROMISES.
Runs hard – you need a trigger that doesn’t. Red – tactical – matches custom builds – polymer – flat face – competition. Lightweight – polymer – vs factory hinged – keeps light – faster swing, less muzzle flip – forward set – reduces travel – mount in seconds. No sharp edges – de-horned – snag-free. Competition, duty, and carry ready. All factory safeties retained.
DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.
Fits M2.0 Polymer Frame Only – Flat Faced Forward Set Trigger Kit – Red – Polymer – 9mm / .40 S&W / .45 ACP / 10mm – M2.0 only – polymer frame – not Shield / not 1.0 / not Metal Frame. Will NOT work in Shield or Metal – length specific – dedicated. Mounts in 30 seconds – field strip, swap sear and trigger, function check. Positive lock – won’t walk off under recoil. Works with factory striker safety – no tools required. Includes 1x red polymer flat faced forward set trigger – 1x forward set sear actuator – 1x sear spring – 1x slave pin – fitted case.
SPECS – FACTUAL AND PRECISE.
Model: Flat Faced Forward Set Trigger Kit for M2.0 – Red – Polymer – Flat Face Competition Upgrade – Drop-In – Forward Set Sear
Color: Red – Polymer Body – Solid Trigger – Steel Sear – Polymer Finish – Center Pivot Safety
Compatibility: M&P M2.0 – Polymer Frame Only – 9mm / .40 S&W / .45 ACP / 10mm – All Polymer M2.0 Models – Not Shield / Not 1.0 / Not Metal Frame
Mounting: Drop-In – No Gunsmith – 30 Second Install – Uses Factory Striker Safety – Includes Sear Spring and Slave Pin – Maintains Factory Safety Values
Interface: Flat Faced – Forward Set Geometry – Reduces Overall Travel and Reset – Short Reset – Budget-Friendly Competition Ready
Weight: 0.8 oz – Forward Set – Match Grade – Spec – Competition Ready
Reviews
There are no reviews yet.