Free U.S. Shipping on Orders Over $150
$ 167.40
Lock Trigger. Hold Strong – Flat Forward. Flat faced forward set Sear and trigger kit for all M&P center fire pistols – built to outrun stock trigger. Drop-in – no gunsmith – flat face – forward set – competition ready – solid aluminum trigger with center pivot safety – maintains factory safety values. Reduces trigger travel – reduces reset – lighter pull – crisper break – tighter groups. Type: forward set sear & trigger kit – flat faced aluminum – fits M&P center fire – 9mm / .40 S&W / .357 SIG / .45 ACP / 10mm – all M&P 1.0 and M2.0. Reinforced – keeps locked after rapid fire. Built to outrun stock. Drop it in. Run it hard.
In stock – ready to ship
In stock – ready to ship
TRIGGERS BUILT TO OUTRUN STOCK.
Factory centerfire triggers are hinged, gritty, and compromise control. Spongy take-up that stacks and limits accuracy. Flat faced forward set Sear and trigger kit for all M&P center fire pistols – built to fix pistol. Type: forward set sear & trigger kit – flat faced aluminum trigger – fits centerfire – all M&P 1.0 and M2.0 – full size – compact – 9mm / .40 S&W / .357 SIG / .45 ACP / 10mm – drop-in – no fitting – competition grade. Finish: Black – solid body aluminum trigger – steel forward set sear and trigger bar – heat treated. Flat face – forward set geometry – center mounted pivoting safety – maintains factory safety values – ready for carry or comp. Reinforced – keeps locked after mag dumps. Built to outrun stock. Color matches black slide.
POSITIVE GRIP. FASTER TRANSITIONS.
Stock triggers are curved, hinged, and slip under stress. This isn’t. Flat faced profile – aggressive flat face – improved ergonomics – better finger placement – consistent pull – no burn on rapid fire. Forward set design – reduces overall trigger travel – reduces pre-travel and over-travel – shorter reset – faster follow-up shots, less fatigue. Solid aluminum trigger – steel sear and trigger bar – reduced pull weight – approximately 1-2lb reduction vs factory – prevents wear under sweat and solvents. Every transition you don’t fight is time saved. Victory is still earned, stays locked in flat forward.
BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.
Solid body aluminum trigger + forward set sear and trigger bar – direct replacement – tighter than factory – plus forward set sear – maintains factory safety values. Hard finish – Black – won’t fade, won’t chip – aluminum trigger – harder than factory. Direct drop-in – no gunsmith – no fixtures – field strip, remove factory trigger, sear and trigger bar, drop in flat faced kit – 30 seconds – easily installed. No modification to fire control – no fitting – keeps reliability. Cold proof to -40F, heat proof to 600F. Will not walk off under 1000 round day or competition use. Length: factory forward set – centerfire Gen all – fits all M&P 1.0 and M2.0 centerfire – 9mm / .40 / .357 / .45 / 10mm – not Shield – not 22LR – not Bodyguard. Every unit factory spec. Arrives ready to install.
CONTROL UNDER PRESSURE. NO COMPROMISES.
Runs hard – you need a trigger that doesn’t. Black – tactical – matches slide and frame – flat face – competition. Lightweight – aluminum – vs factory polymer hinged – keeps light – faster swing, less muzzle flip – forward set – reduces travel – mount in seconds. No sharp edges – de-horned – snag-free. Competition, duty, and carry ready. All factory safeties retained.
DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.
Fits All M&P Centerfire Pistols – Flat faced forward set Sear and trigger kit – Black – Aluminum – 9mm / .40 / .357 / .45 / 10mm – M&P 1.0 and M2.0 – not Shield 1.0 / 2.0 / Plus – not 22 – not Bodyguard. Will NOT work in Shield or Rimfire – length specific – dedicated. Mounts in 30 seconds – field strip, swap sear, trigger bar and trigger, function check. Positive lock – won’t walk off under recoil. Works with factory sear housing and striker safety – no tools required. Includes 1x black flat faced forward set trigger – 1x forward set sear – 1x forward set trigger bar – 1x sear spring – 1x trigger return spring – fitted case.
SPECS – FACTUAL AND PRECISE.
Model: Flat faced forward set Sear and trigger kit for all M&P center fire pistols – Flat Face Competition Upgrade – Drop-In – Forward Set
Color: Black – Solid Aluminum Trigger – Steel Sear and Trigger Bar – Finish – Center Pivot Safety
Compatibility: Centerfire – All M&P 1.0 and M2.0 – Full / Compact – 9mm / .40 S&W / .357 SIG / .45 ACP / 10mm – All Generations – Not Shield / Not 22LR / Not Bodyguard
Mounting: Drop-In – No Gunsmith – 30 Second Install – Uses Factory Striker Safety – Includes Sear Spring and Return Spring – Maintains Factory Safety Values
Interface: Flat Faced – Forward Set Geometry – Reduces Overall Travel and Reset – Short Reset – Competition Ready
Weight: 1.1 oz – Forward Set – Match Grade – Spec – Competition Ready
Free shipping over $150. Packed right, shipped fast. Add match control to your SIG P320.
Reviews
There are no reviews yet.