Single Point Paraclip Adapter for AR Rifles – Black

Description

SLING ADAPTERS BUILT TO OUTRUN STOCK.

Factory sling loops bend, rattle, and slice your sling. Stamped loops that shift under recoil and trap sling. Single Point Paraclip Adapter for AR Rifles – Black – built to fix sling furniture. Type: single point conversion – fits MS1 / MS3 / MS4 sling system – combines with MS1 Sling and Paraclip to provide two-to-one-point convertibility. Black – steel Paraclip + Melonite finish + polymer hardware + nylon 1.25 inch webbing – fits AR-15 / M4 / M16 – rear receiver plate / end plate. Reinforced hardware – keeps sling locked after transition drills. Built to outrun stock.

POSITIVE GRIP. FASTER TRANSITIONS.

Stock loops are sharp, narrow, and break under load. This isn’t. Slim profile – low-pro Paraclip – improved ergonomics – better shoulder transitions, no snag on plate carrier. Aggressive geometry – front and rear – won’t cut glove or sling. Paraclip – secure – 360-degree rotation limited – prevents sling twist – push-button gate – quick attach / detach. Nylon webbing – 1.25 inch – box-stitched – resists fray under 200 lb sling tension. Every transition you don’t fight is time saved. Victory is still earned, sling stays locked in black.

BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.

Impact-resistant steel – Paraclip steel + black Melonite finish – tougher than polymer hooks – plus polymer D-ring + nylon webbing. Black – Type III hard – won’t fade in sun, won’t chip when dropped. Internal anti-rotation – locks to MS1 slider – prevents adapter from spinning under load. Resists solvents, oils, deet. Drop-in install – no tools – clip Paraclip to MS1 slider loop, loop webbing through rear sling plate – 10 seconds. No modification to lower. No free-float removal – keeps Mil-spec reliability. Cold proof to -40F, heat proof to 180F. Will not loosen under full-auto or 2-point drag. Every unit factory spec. Arrives ready to install.

CONTROL UNDER PRESSURE. NO COMPROMISES.

Rifles run hard – you need an adapter that doesn’t. Black – low-vis, no glare, matches black lower, stock, grip. Lightweight – 1.6 oz – vs 2.5 oz steel snap hook. Keeps front end light – faster swing, less fatigue. Dual mode – use as one-point to two-point convertible – fits MS1 Sling – Paraclip – single point mode for CQB – two-point for patrol – converts in seconds. No sharp edges – snag-free – de-horned. Competition, patrol, and field ready. All factory safeties retained.

DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.

Fits AR Rifles – Black – AR-15 / M4 / M16 – requires MS1 Sling + Paraclip (sold separately) – fits standard rear sling plate – ASAP plate, end plate, stock sling mount. Will NOT work as standalone sling – adapter only – requires MS1 sling. Mounts in 10 seconds – clip to sling, loop through plate. Positive lock – won’t walk off under recoil or sling drag. Works with MS1 / MS3 adapters – stays clear of light mounts. Will not interfere with QD socket. Includes 1x Paraclip adapter assembly – black.

SPECS – FACTUAL AND PRECISE.

Model: Single Point Paraclip Adapter for AR Rifles – Black – MS1/MS3 Single Point – MAG516-BLK
Color: Black – Steel Paraclip Melonite + Polymer Hardware + Nylon 1.25″ Webbing
Compatibility: AR Rifles – AR-15 / M4 / M16 – MS1 / MS3 Sling System – Two-to-One-Point Design – Requires MS1 Sling + Paraclip
Mounting: Drop-In – Clip to MS1 Slider – No Gunsmith – 10 Second Install – Rear Plate / End Plate
Interface: Paraclip – 360-Degree Limited Rotation – Push-Button Gate – Quick Detach
Weight: 1.6 oz – Black – Low-Profile – Box-Stitched Webbing

Free shipping over $150. Packed right, shipped fast. Convert your sling to single point in black.