Grip for CZ Scorpion EVO 3 – Polymer Black

Description

GRIPS BUILT TO OUTRUN STOCK.

Factory EVO grips are slick, fat, and angled wrong. Smooth plastic that shifts under recoil and burns your hand. Two-piece mold that flexes and traps sweat. Grip for CZ Scorpion EVO 3 – Polymer Black – built to fix EVO furniture. Fits CZ Scorpion EVO 3 – S1 pistol, S1 carbine, S2 – standard grip screw and mount – replaces factory pistol grip – direct bolt-on. Black – molded polymer, not painted. Reinforced polymer – internal ribbing – keeps grip rigid after mag dumps. Built to outrun stock.

POSITIVE GRIP. FASTER TRANSITIONS.

Stock EVO grips are slick when wet and fat in hand. This isn’t. 17-degree grip angle – improved ergonomics – better natural point, better recoil control, better barricade control. Aggressive TSP texture – front and rear – grips glove or bare hand – stippled sides – wrap-around traction. Beavertail top – fills hand, prevents slide bite under PCC recoil. Extended front lip – protects hand from hot trigger guard. No flex under firing grip tension. Palm swell – fills medium to large hand – no hot spots. Front finger grooves – indexed – consistent hand placement. Every transition you don’t fight is time saved. Victory is still earned, EVO holds better in black.

BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.

Impact-resistant reinforced polymer – same formula as rifle stocks – lighter than factory with steel insert. Black – UV stabilized – won’t fade in sun, won’t chip when dropped. Internal storage core option – water-resistant – holds small parts, batteries – trap door base – positive latch on MOE EVO pattern. Resists solvents, oils, deet. Drop-in install – one screw – remove factory grip bolt – T30 – pull old, install new – no modification to lower. No fitting. Keeps Scorpion reliability – accepts factory grip bolt and washer. Cold proof to -40F, heat proof to 180F. Will not loosen under full-auto PCC. Every unit factory spec. Arrives ready to install.

CONTROL UNDER PRESSURE. NO COMPROMISES.

Scorpion EVO runs fast – you need a grip that doesn’t. Black low-vis – no glare, matches black lower, handguard, stock. Lightweight – 2.8 oz – vs 3.6 oz factory. Keeps center balance – faster swing, less fatigue – ideal for PCC competition. Storage – trap door compatible – holds battery or bolt. Aggressive texture – no slip in rain, sweat, mud. No sharp edges – snag-free – de-horned – won’t tear gear. Competition, patrol, and field ready. All factory safeties retained. No modification to trigger group.

DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.

Fits CZ Scorpion EVO 3 – S1 / S2 – pistol / carbine / SBR – standard grip interface – factory bolt pattern – uses factory grip screw. Will NOT fit CZ Scorpion EVO 3 Plus with larger lower, will NOT fit CZ Bren, will NOT fit AR. Mounts in 30 seconds – unscrew factory grip, remove, install new grip, torque 25 in-lb. Positive lock – won’t walk off under recoil. Works with standard EVO trigger guard and safety. Includes grip bolt washer. Will not interfere with mag release on most models. MOE EVO profile – improved over stock EVO angle.

SPECS – FACTUAL AND PRECISE.

Model: Grip for CZ Scorpion EVO 3 – Polymer Black – MOE EVO Pattern
Color: Black – Molded Reinforced Polymer – TSP Texture – Internal Storage Core Compatible
Compatibility: CZ Scorpion EVO 3 – S1 / S2 – Pistol / Carbine / SBR – Direct Bolt-On – Replaces Factory Pistol Grip
Mounting: Drop-In – One Bolt – No Gunsmith – T30 – 25 in-lb Torque – Factory Hardware Compatible
Texture: TSP – Aggressive Stipple – Palm Swell – Beavertail – Finger Grooves – Storage Capable
Weight: 2.8 oz – Length: Standard EVO – Black – No MOE Marking Version Available

Free shipping over $150. Packed right, shipped fast. Upgrade your Scorpion EVO grip in black.