SLING MOUNTS BUILT TO OUTRUN STOCK.
Factory sling loops bend, rattle, and slice your sling. Stamped loops that shift under recoil and trap sling. Sling Mount Kit Type 2 – Black Sling Attachment – built to fix sling furniture. Type 2 – low-profile – fits M-LOK handguards – AR-15 carbine, mid, rifle, AK M-LOK, shotgun M-LOK – black – anodized 4140 steel + 6061 aluminum plate. QD + loop – dual interface – accepts QD push-button swivel + 1.25 inch sling loop. Reinforced hardware – keeps sling locked after mag dumps. Built to outrun stock.
POSITIVE GRIP. FASTER TRANSITIONS.
Stock loops are sharp, narrow, and break under load. This isn’t. Slim profile – Type 2 low-pro – improved ergonomics – better C-clamp grip, no snag on barricade. Aggressive bevels – front and rear – won’t cut glove or sling. M-LOK mount – 2 slot – T-nuts + screws – mount at 3, 6, 9 o’clock. Loop + QD socket – mount push-button QD, HK hook, MASH hook, 1.25 inch webbing. Rotation limited – 360-degree QD option – prevents sling twist. No flex under 200 lb sling tension. Every transition you don’t fight is time saved. Victory is still earned, sling stays locked in black.
BUILT FOR HARD USE. ENGINEERED TO OUTPERFORM.
Impact-resistant steel – 4140 hardened sling loop + 6061 T6 aluminum M-LOK plate – lighter than full steel quad mount. Black – Type III hard anodized + manganese phosphate – won’t fade in sun, won’t chip when dropped. Internal anti-rotation tabs – locks to M-LOK – prevents mount from spinning under load. Resists solvents, oils, deet. Drop-in install – no tools beyond T20 – remove M-LOK slots cover, insert T-nuts, torque to 35 in-lb – 20 seconds. No modification to handguard. No free-float barrel nut removal – keeps Mil-spec reliability. Cold proof to -40F, heat proof to 180F. Will not loosen under full-auto or 2-point drag. Every unit factory spec. Arrives ready to install with hardware.
CONTROL UNDER PRESSURE. NO COMPROMISES.
Rifles run hard – you need a mount that doesn’t. Type 2 low-pro – keep weight low – mount only where you need. Black – low-vis, no glare, matches black handguard, lower, stock, grip. Lightweight – 1.2 oz with hardware – vs 2.5 oz steel stamped loop. Keeps front end light – faster swing, less fatigue. Dual interface – QD socket + fixed loop – fits QD swivel, 1 inch, 1.25 inch slings, single point, two point. No sharp edges – snag-free – de-horned. Competition, patrol, and field ready. All factory safeties retained. No modification to sling.
DROP-IN DOMINANCE. ZERO FITTING. ZERO EXCUSES.
Fits M-LOK – 2 slot minimum – fits AR-15, AR-10, AK, shotgun, any M-LOK handguard – standard on Magpul MOE, M-LOK, PSA, Aero, BCM. Will NOT fit KeyMod without adapter, will NOT fit Picatinny without M-LOK rail. Mounts in 20 seconds – insert T-nuts, align, torque. Positive lock – won’t walk off under recoil or sling drag. Works with M-LOK accessories – stays clear of MVG, AFG, light mounts. Will not interfere with bipod lug on most models. Includes 2x M-LOK T-nuts, 2x screws, thread locker pre-applied.
SPECS – FACTUAL AND PRECISE.
Model: Sling Mount Kit Type 2 – Black Sling Attachment – Type 2 Low-Profile M-LOK
Color: Black – 4140 Steel Loop – 6061 Aluminum Plate – Hard Anodized + Phosphate
Compatibility: M-LOK – 2 Slot – QD Socket + 1.25 Inch Loop – AR-15 / AK / Shotgun M-LOK Handguards
Mounting: Drop-In – M-LOK T-Nuts – No Gunsmith – 35 in-lb Torque
Interface: QD Push-Button + Loop – Accepts QD Swivel, HK Hook, MASH Hook, 1.25″ Sling
Weight: 1.2 oz – Low-Profile Type 2 – Anti-Rotation Tabs – Black
Free shipping over $150. Packed right, shipped fast. Lock your sling in black.
Reviews
There are no reviews yet.